Sleeve Wrapping MachineWe deal in Collating machines & Sleeve Wrapping Machine
This is Sleeve Applicator for Cylindrical Bottles
- Container: Cylindrical Bottles/container
- Sleeve applying area: Body sleeving/neck sleeving
- Bottle Dia: 30mm to 100mm
- Capacity: 80-100 bottles / minute
- Sleeve cut length: 50mm to 200mm
Machine Features
- Fully automatic operation.
- Rigid Structure.
- Good Speed.
- PLC Controlled.
- Machine will have manual up & down arrangement.
- Shrink Tunnel.
Prerequistes
- Floor Space requirement: Approximately 1mtr from all sides of the machine. Hence clearance of 1mtr should be added to the actual size of the machine. i.e. 4 mtrs x 2.2mtrs x 3mtrs height.
- Operator requirement: 1 Skilled operator, 1 semi-skilled operator.
- Electrical Supply: Connected load 2KW, 415+/-10%, 50Hz +/-3% 3Phase Earth & Neutral
- Utility: 3 Phase electric supply. 5HP Compressor, since the machine requires clean and dry air supply for pneumatic cylinders.
- Essential
- Caps should be properly seated on the bottle.
- Operator should understand the working of the machine properly.
TECHNICAL SPECIFICATION
- Dimension of the machine 3mtrs x 1.2mtrs x 2.4mtr height.
- Conveying system with a feed screw arrangement - 3 mtr long.
- 0.5HP geared motor for conveyor.
- 0.25HP geared motor for unwind nip arrangement
- 0.25HP geared motor for feed screw
- 0.25HP motor for sleeve dropper.
- Pneumatics of Festo make.
- Electric accessories of siemens/L&T/standard make.
- Variable frequency drive, Delta make.
- PLC
- Servomotor.
- "1.2 meter long tunnel with MS Body structure
- 2 nos 0.25HP blower motor
MACHINE DESCRIPTION
- Roll type sleeve should be loaded on the unwind station.
- Web is unwound from the unwind unit through a unwind nip arrangement.
- This web is then passed through a dancer unit; this unit maintains the required tension on the web.
- Then the web passes through a decreaser, in this unit the web is opened fully.
- This web is then passed towards the cutting unit through a feed nib arrangement.
- In the cutting unit the sleeve is cut to the required length
- This sleeve is then pushed over the body of the bottle through a sleeve pusher arrangement.
- Bottles are feeded to the machine through a feed screw arrangement for proper pitching.
- Bottles with the sleeve applied over the body comes out from the other side of the machine and pass through the shrink tunnel, where it gets shrinked
|
